Esc
↑ ↓ to moveEnter to openEsc to close

Adjust tool

Adjust image contrast

Give light and dark tones more separation, or soften a harsh picture. Fine-tune contrast before downloading.

Your image

Processed on your device
Canvas support is required.

Live preview

Try the demo

Contrast starts at 115%. Set it to 100% for neutral contrast, or lower it for a softer look.

Choose your crop

Drag on the preview for a custom crop. The shaded edges will be removed. Need more room instead? Uncrop the photo.

PNG and WebP keep transparency.

Continue with this photo Christmas frameNew Year frame Uncrop a photoAdd textAdd a frameCompress Open a photo first, then pick the next step. Your edit carries over and stays on this device.

Three steps

How to adjust image contrast

  1. Open an image and inspect the contrast preview.
  2. Adjust Contrast while watching bright and dark details.
  3. Download a new version once the tones look right.

Separation without losing the picture.

Contrast controls the separation between lighter and darker tones. Increasing it can make a flat-looking photograph feel more defined. Reducing it softens the difference between highlights and shadows. The slider starts at 115%, with 100% representing no contrast adjustment.

A higher setting can make shadows too dark and highlights too pale. Check textured areas at both ends of the tonal range, rather than judging only the overall punch of the image. A modest adjustment often preserves more useful detail than an extreme one.

Brightness and contrast solve different problems. Brightness changes overall lightness; contrast changes tonal separation. You can combine both inside this editor, then use saturation if the colors need their own adjustment. These are browser filters, not AI enhancement or automatic scene correction.

What the slider does to each tone

Contrast pivots on middle gray. Tones lighter than the middle get lighter, tones darker than it get darker, and middle gray itself does not move. The further a tone sits from the middle, the further it travels, until it reaches pure black or pure white. We checked where that happens on the usual 0 to 255 scale:

ContrastTurns pure blackTurns pure white
120 percent22 and below234 and above
150 percent43 and below213 and above
180 percent, the maximum57 and below199 and above

Lower contrast for a softer picture

At 150 percent the darkest and lightest sixth of the range lose their detail. Below 100 the opposite happens: at 80 percent black becomes 25 and white becomes 229, and at the 30 percent minimum black is 89 and white is 165, which looks like a photo seen through fog. Around 80 to 90 percent gives a soft, faded look while the picture stays clear.

Lower contrast also calms harsh midday light. At 90 percent, a deep shadow at 40 lifts to about 49 while white eases to 242, so hard shadows under eyes and hats soften without the photo looking gray.

Crisp documents and signatures

A photographed page is usually light gray paper with dark gray ink. Raise Brightness first, since the editor applies it before Contrast, then add Contrast. In our check, Brightness 115 with Contrast 150 turned paper at 200 into pure white and moved ink at 80 slightly darker, to 74.

Thin or light strokes need care. Pencil at 150 went the other way and lightened to 194, because after brightening it sits above middle gray. If faint lines start to vanish, lower both sliders a little. For a signature that goes into an online form, the signature resizer whitens the paper for you and fits the file into 10 to 20 KB. For a page that should be black on white, combine Contrast with black and white.

Once the page is crisp, convert the handwriting to text or copy printed words with image to text. Those two tools send a copy of the image to an AI service when you press Read, while this editor works on your device.

Flat, foggy photos, and knowing when to stop

Fog, haze, glare, a dirty window or a backlit subject all squeeze the tones toward the middle. Contrast between 110 and 130 percent usually brings back depth. Check dark hair, clothing and shadows, which close up into solid black first, and bright skies and skin, which turn chalky.

Raising contrast also makes colors look stronger, because it stretches the red, green and blue values apart. In our check, a warm tan of 200, 150, 100 became 236, 161, 86 at 150 percent. If colors start to glow, bring saturation down a little rather than giving up the contrast.

Contrast also brings out texture. That suits stone, bark, old wood and fabric, but it makes skin look rougher and lines deeper, so keep portraits between 100 and 110 percent. Before you save, find the darkest area that should still show detail, such as dark hair or a navy jacket, and the brightest, such as clouds or a white shirt. If either has gone flat, step back 5 to 10 points.

Questions

How do I increase the contrast of a photo?

Move Contrast above 100 percent; this page starts at 115, and most photos need no more than 125. Raise it in small steps while you watch the darkest and brightest areas, stop before they lose detail, then download JPG, PNG or WebP.

Will contrast sharpen a blurry photo?

No. Edges can look a little more defined because light and dark move apart, but contrast cannot restore focus or remove motion blur. A blurred photo stays blurred at any setting.

How do I make a softer-looking image?

Lower Contrast to 80 or 90 percent. Blacks turn dark gray and whites turn soft gray, which gives a gentle, faded look. Below about 60 percent the photo starts to look foggy.

Can I adjust brightness at the same time?

Yes. All the tone sliders work together, and Brightness is always applied before Contrast, so set it first. For brightness on its own, the brightness tool explains how far you can push it.

What does contrast do to a photo?

It changes how far apart the light and dark tones are. More contrast makes shadows deeper and highlights brighter, so the photo looks punchier. Less contrast pulls everything toward gray for a softer, flatter look.

What is a good contrast setting?

For most photos, 105 to 125 percent is enough. Documents and signatures often need 140 to 160 percent. Anything higher clips a lot of detail, so check the darkest and brightest areas before you save.

How do I make text darker on a scanned document?

Raise Brightness to about 110 to 115 percent so the paper turns white, then raise Contrast to 140 to 160 percent. Dark text gets slightly darker and the page looks much crisper. Light pencil can fade, so check thin strokes.

Why do colors look stronger after I raise contrast?

Contrast works on the red, green and blue values separately and pushes each away from the middle, so the gaps between them grow. That reads as stronger color. Lower Saturation a little if it looks like too much.

Is high contrast or low contrast better?

Neither. High contrast suits graphic subjects, documents and dull, hazy light. Low contrast suits portraits, soft light and calm, faded styles. Pick the one that matches the mood, and keep detail in the areas that matter.

Sources: contrast() CSS function (MDN), Filter Effects Module Level 1: contrast equivalent (W3C), Understanding digital camera histograms: tones and contrast (Cambridge in Colour)

See all tools