Esc
↑ ↓ to moveEnter to openEsc to close

Adjust tool

Adjust image brightness

Lift a dark photo or soften an overly bright one. Choose the brightness by eye, then save a separate copy.

Your image

Processed on your device
Canvas support is required.

Live preview

Try the demo

Brightness starts at 115%. Use 100% for the original level, or move the slider to darken the picture.

Choose your crop

Drag on the preview for a custom crop. The shaded edges will be removed. Need more room instead? Uncrop the photo.

PNG and WebP keep transparency.

Continue with this photo Christmas frameNew Year frame Uncrop a photoAdd textAdd a frameCompress Open a photo first, then pick the next step. Your edit carries over and stays on this device.

Three steps

How to adjust image brightness

  1. Open a photo and compare the slightly brighter preview.
  2. Move Brightness toward 100% or adjust it for the result you want.
  3. Check highlights and shadows, then download your edited copy.

More light, with a limit.

Brightness changes the lightness of the whole image. A small increase can help a photo that looks dark on screen, while a reduction can make a bright composition more comfortable to view. This tool starts at 115% so the effect is visible; 100% leaves brightness unchanged.

Look at pale surfaces, faces and dark clothing while you adjust the slider. Raising brightness too far can wash out highlights, and lowering it too far can hide shadow detail. Use contrast separately if you want greater separation between light and dark areas.

The tool changes existing pixels locally. It does not recover information from a completely white highlight or a completely black shadow, and it does not use AI relighting. Your original file is untouched, so you can export more than one version and compare them.

Brightness, exposure and contrast are not the same

Exposure happens in the camera. It is the amount of light the sensor collected, set by the aperture, shutter speed and ISO. Brightness on this page works afterwards, on the finished pixels. It multiplies every red, green and blue value by the slider amount, so 150 percent makes each value one and a half times larger.

That has two effects. Black stays black, because zero times anything is still zero. And light tones reach the top of the scale first, so they are the first to turn flat white. Contrast is a different control that pushes tones away from middle gray in both directions. Use the contrast tool when a photo looks flat rather than dark.

How far you can push it

Each color value runs from 0 to 255. Once a value reaches 255 it cannot go higher, and any texture in that area is gone from the saved file. In the preview, watch the brightest thing in the frame, such as a sky, a white shirt or a lamp, and step back 5 to 10 points when its texture turns into a flat patch. The table shows where clipping starts:

BrightnessValues that turn pure white
115 percent, where this page starts222 and above
120 percent213 and above
150 percent170 and above, the top third
180 percent, the maximum142 and above

Darkening without turning white gray

Below 100 percent, white turns gray: at 80 percent pure white becomes 204, and at 70 percent it becomes 178. That is fine for a glaring sky, but a white wall or the paper of a document loses its clean look. To darken a photo and keep its whites, try Brightness 90 with Contrast about 125. In our check, white stayed white while middle gray dropped from 128 to 111.

Underexposed photos and dim scans

For a dark photo, raise Brightness until the main subject looks right, then look at the brightest part of the picture. If a window or the sky turns flat white before the faces are bright enough, you have to choose, because this slider cannot lift only the shadows. Often the best answer is to crop the bright area away. Brightening also makes grain and blocky compression in dark areas easier to see, so stop at the lowest setting that works.

Night and concert photos are meant to be mostly dark. Raise Brightness only until the subject reads clearly, and let the background stay dark. Lifting the whole frame makes noise obvious and turns street lights and stage lamps into flat white discs.

A scanned or photographed page often looks gray because the paper is not quite white. Paper around 215 becomes pure white at 120 percent. Text gets lighter too: in our check, dark gray text at 90 became 108. If the writing starts to look washed out, add some Contrast. When the pages look right, you can combine them into one file with JPG to PDF, or copy the text from the page with the image to text tool.

Questions

Can I lower the brightness of a photo?

Yes. Move Brightness below 100 percent; the same slider lightens and darkens. Darkening also turns white areas gray, so add a little Contrast if you want whites to stay clean.

Does brightening recover lost detail?

No. Brightness rescales the values the photo already has. An area that is pure white in the file has no detail left to find, and a pure black area stays black at any setting, because the slider multiplies values.

What is the neutral setting?

100 percent leaves brightness unchanged. This page starts at 115 percent so you can see the effect straight away. Reset edits puts every control back to its neutral value and shows your original photo.

Is brightness the same as exposure?

No. Exposure is how much light the camera captured when you took the photo. Brightness changes the saved pixels afterwards. It can make a dark photo look lighter, but it cannot add detail the camera never recorded.

Why does my photo look washed out after brightening?

Light tones hit the top of the scale first and turn flat white, while the darkest tones barely move. Lower Brightness a little, or add Contrast at 105 to 115 percent to put some depth back into the shadows.

How do I brighten a photo without making it grainy?

Brighten as little as you can, because the slider lifts grain and compression blocks along with the picture, and there is no noise reduction here. Save as PNG, or as JPG at 90 percent or more, so saving adds no new blocks.

What brightness setting should I use?

There is no single right number. Slightly dark photos usually need 105 to 125 percent, and very dark ones 130 to 160. Watch the brightest part of the picture and back off as soon as it loses texture.

Why do faces look flat when I brighten a lot?

Skin is usually brightest in its red channel, so red reaches the 255 limit first and the shading on cheeks and foreheads starts to flatten. For a light skin tone we tested, that began at about 114 percent. Lower Brightness until the face has shape again.

Sources: brightness() CSS function (MDN), Filter Effects Module Level 1: brightness equivalent (W3C), Camera exposure: aperture, ISO and shutter speed (Cambridge in Colour), Understanding digital camera histograms: tones and contrast (Cambridge in Colour)

See all tools