Esc
↑ ↓ to moveEnter to openEsc to close

Online microphone test, no upload

Mic test

This online mic test checks your microphone in a few seconds. To test your microphone, press Test my microphone and allow it when the browser asks, then speak. If the meter moves and the page says your microphone works, it is working. Record 5 seconds to hear how you sound. The test runs on your device and the sound is never uploaded.

Press Test my microphone and allow it when the browser asks. Then say something.

How to test your microphone

  1. Press Test my microphone

    Allow the microphone when the browser asks. If you have more than one, choose it in the list.

  2. Speak or tap near it

    The meter, the wave and the frequency bars move with the sound, and the page says whether it hears you well.

  3. Listen back

    Press Record 5 seconds and play back to hear your voice as others will hear it on a call.

  4. Fix what it finds

    Too quiet, clipping or silent: the message says what to change. The steps below cover blocked microphones.

How to read the results

The meter shows the loudest sound in each moment in decibels of full scale (dBFS): 0 dB is the loudest a recording can hold, and quieter sounds are negative numbers. The black mark holds the recent peak for a moment, so short sounds are easy to see. Normal speech at a normal distance usually peaks between -20 and -6 dB. Peaks that touch 0 dB are clipped, and the page warns about it.

The wave shows the sound itself, and the frequency bars show how much of each pitch it has, from 50 Hz to 16 kHz. A voice shows mostly between about 100 Hz and 4 kHz. A steady bar that never changes, while you are silent, is usually a hum or a fan.

Below the meter, the page lists what the browser reports about the microphone: its name, sample rate and number of channels, and whether the browser's noise reduction, echo reduction and automatic volume are on. Tick the box to turn that processing off and hear the microphone as it really is; call apps usually leave it on.

The page saysWhat it meansWhat to do
Your microphone worksYour voice reaches the browser at a good levelNothing. Use the playback to check it sounds clear
Your voice is quietSound arrives, but at a low level: under about -34 dB on averageMove closer, or raise the input volume in the system sound settings
The sound is clippingThe loudest parts hit the top of the scale and are cut offMove back, speak more softly, or lower the input volume
We hear almost nothingUnder about -54 dB on average for 5 seconds: no useful soundCheck the mute switch, the input volume and the chosen microphone
Not allowed, or in useThe browser or another app is blocking itSee If your microphone does not work, below

Before a call or a recording

Test with the microphone you will use, chosen in the list, and with headphones if you will wear them, because a headset microphone sounds different from a laptop's. Close call apps first: a microphone in use by Zoom, Teams or Discord may not open in the browser at the same time.

If this test works but a call app does not hear you, the browser can use the microphone and the problem is in that app: check its own audio settings and which microphone it has chosen. If neither works, the cause is the system, the cable or the microphone itself.

To record yourself for longer and save the file, use the voice recorder, which saves MP3 or WAV. To test your camera as well, use the webcam test.

If your microphone does not work

If the page says the microphone was not allowed, it was blocked in the browser or the system: the table below shows where. If it says the microphone is in use or could not start, close a call app such as Zoom, Teams or Discord, or another tab that uses it, then try again. If no microphone is found, check the cable and the mute switch, and that the right device is chosen in the list.

WhereWhat to do
Chrome or Edge on a computerClick the icon at the left of the address bar, then set Microphone to Allow. Or open Site settings from there and allow it for uncrop.si.
FirefoxClick the microphone or permissions icon at the left of the address bar and remove the block, then reload the page and allow it.
Safari on a MacSafari menu, Settings for uncrop.si (or Settings, Websites, Microphone), then choose Allow or Ask.
Windows 11Settings, Privacy and security, Microphone: turn on Microphone access, Let apps access your microphone, and Let desktop apps access your microphone. Browsers count as desktop apps.
macOSSystem Settings, Privacy and Security, Microphone: turn on your browser. Quit and reopen the browser after changing it.
iPhone and iPadSafari: Settings, Apps, Safari, then Microphone under Settings for Websites: choose Ask or Allow. Chrome: Settings, Apps, Chrome, then turn on Microphone. On iOS 17 and earlier these are directly under Settings.
AndroidSettings, Apps, Chrome (or your browser), Permissions, Microphone: choose Allow only while using the app. In Chrome you can also tap the icon left of the address bar.

Questions

How do I test my microphone?

Press Test my microphone above, allow it, and speak. If the meter moves and the page says your microphone works, it does. Press Record 5 seconds and play back to hear how you sound.

Is my microphone sound recorded or uploaded?

No. The sound goes from the microphone to this page and nowhere else. The 5 second sample stays in the page's memory until you close it. A line under the results counts the requests the page has sent since you turned the microphone on.

Why is my microphone not working?

Most often it is blocked for the browser, blocked in the system privacy settings, muted, or in use by another app. The message the page shows says which, and the table above lists where to allow it on each system.

Why is my microphone so quiet?

The input volume may be low, the microphone too far away, or the wrong microphone chosen. Raise the input level in the system sound settings, move closer, and check the list. Speech should peak around -20 to -6 dB on the meter.

How do I test my mic on iPhone or Android?

Open this page in Safari on iPhone or Chrome on Android and press Test my microphone. The phone asks for permission the first time. The playback test lets you hear how you sound through the phone's microphone.

How do I hear myself on the mic?

Press Record 5 seconds and play back. It records a short sample and plays it straight away, so you hear your voice the way others will, with no echo of yourself while you speak.

What does clipping mean?

The loudest parts of the sound reach the top of what the recording can hold and are cut flat, which sounds harsh and distorted. Move back from the microphone, speak more softly, or lower the input volume.

Can I test a headset or USB microphone?

Yes. Plug it in, then choose it in the Microphone list. The test switches to it at once and shows its name and settings.

See all tools